I have been sick and have fallen behind and need help with the following. ACC 207 Final Project Guidelines and Rubric Overview The final project for

I have been sick and have fallen behind and need help with the following.ACC 207 Final Project Guidelines and Rubric  Overview The final project for this course is the creation of a quantitative analysis with a memo to management.  Classifying a company’s costs allows for an in-depth analysis of the impact that changes in output have on revenues, costs, and net income or net loss. A costvolume-profit (CVP) analysis will be completed in order to determine the breakeven point. Relevant costs will be used to prepare a flexible budget. Additionally, an appropriate costing system should be selected and the choice should be substantiated with reasonable rationale. Finally, a memo should be prepared for management that summarizes the results of the quantitative analysis and makes recommendations for an optimal costing system to be ethically used by key decision makers.  The project is divided into three milestones, which will be submitted at various points throughout the course to scaffold learning and ensure quality final submissions. These milestones will be submitted in Modules Two, Four, and Five. The quantitative analysis with a memo to management will be submitted in Module Seven.  In this assignment, you will demonstrate your mastery of the following course outcomes:   ? Utilize cost behavior and cost analysis to assist decision makers in planning and adding value to the business ? Prepare a flexible budget for supporting informed managerial decision making  ? Interpret variances for determining the optimal costing system to fit an organization’s internal accounting needs ? Interpret the role of ethics in cost accounting for determining its impact on decision making  Prompt In this assignment, multiple analyses will be conducted in order to obtain a company’s financial information specific to company costs.  MDE manufactures outdoor garden items such as lawn ornaments and bird feeders. MDE uses a standard costing system to set standards for direct materials, labor, and overhead costs. MDE reviews and revises standards as necessary. Recently, budget variances for bird feeders have caused some concern. You, the company’s cost accountant, have been asked to examine the numbers for the product, explain the variances, and suggest ways to improve performance.   Specifically, the following critical elements must be addressed:  You will begin by using the MDE Manufacturing Budget (Table I) to analyze costs, contribution margin, and breakeven point for the bird feeder division. You will then analyze the actual costs and complete a cost-volume-profit (CVP) analysis to determine how many bird feeders must be sold at the current cost and sales price level to earn a $10,000 profit and how much the sales price would have to increase to earn a $10,000 profit at the same cost and sales volume level. Use Tabs 1 and 2 of the Student Workbook. I. Costs  a) Classify all product and period costs appropriately.  b) Compute a cost-volume-profit analysis. What are the implications of this analysis?   c) Compute contribution margin per unit and contribution margin ratio.   d) Determine the breakeven quantity and the breakeven revenue accurately.  e) Determine if the company is breaking even. What are cost-volume-profit analysis implications on short-term planning?   Your next step is to use the MDE Manufacturing Budget (Tables I, II, III, IV) to compare the budget and actual costs. Determine where variances occurred and explain why. Use Tabs 3 and 4 of the Student Workbook to present your budgets/variances and Tabs 5 and 6 for all budget/variance calculations.  II. Prepare and Perform a) What are your fixed costs? Segregate them in the budget model.  b) Determine how variable costs change as activity measures change. How can this information be applied?  c) Create the budget model, ensuring fixed costs are hard coded into the model (variable costs are stated as a percentage of the relevant activity measures or as a cost per unit of activity measure).  d) Add actual activity measures to the model. Make sure all information is added accurately.  e) Add the flexible budget calculations to the budget model. Make sure all information is accurate.  f) Compare the flexible budget to the actual expenses. What does this inform? Be sure to discuss the following variances:  i. Static budget variance, including sales volume and flexible budget variances  ii. Price and efficiency variances for direct materials and direct labor  iii. Spending and efficiency variances for variable manufacturing overhead  g) Determine the aspects of the budgeting process that are in need of improvement. Justify your response.  h) Interpret what budget variances represent. Should all variances be investigated?   You have also been asked to give management a recommendation on whether the company should switch from process costing to activity-based costing (ABC). This is an exploratory discussion, but management would like to know more about the difference between the two costing systems and if a different costing system might work better for the company.  III. Main Costing Systems – Activity-Based Costing vs. Process Costing a) Identify the cost allocation system that would benefit this company most. Justify your response.  b) Does this cost allocation system meet management planning and control goals? Explain.  c) What are the ethical implications that should be considered with this cost allocation system?  d) Describe the ethical implications of direct costs versus indirect costs. What considerations should be made when selecting one of these two?  After all of your calculations and research, you are now ready to prepare your report.  IV. Prepare a Memo to Management  a) Summarize your quantitative analysis based on your findings (include answers to all questions in Sections I, II, and III).  b) Report the parts of the budgeting process that are in need of improvement. Provide suggestions to improve those parts.  c) Report overall improvement recommendations to management. Consider the ethical implications when communicating sensitive information.   Milestones  Milestone One: Draft of Costs (Section I) In Module Two, you will submit a draft of the costs section of the final project. Use the MDE Manufacturing Budget (Table I) to analyze costs, contribution margin, and breakeven point for the bird feeder division of the company. In Tab 1 of your Student Workbook, classify costs as either product or period costs. Briefly explain the difference between the types of costs. Then, analyze the actual costs and, using Tab 2 of your Student Workbook, complete a cost-volumeprofit analysis to determine how many bird feeders must be sold at the current cost and sales price level to earn a 10% profit and how much the sales price would have to increase to earn a 10% profit at the same cost and sales volume level. Submit the Student Workbook with Tabs 1 and 2 completed with your cost calculations and a 1-2 page Word document that explains the implications of your findings and addresses all of the critical elements in Section I. This milestone will be graded with the Milestone One Rubric.  Milestone Two: Draft of Prepare and Perform (Section II) In Module Four, you will submit a draft of the prepare and perform section of the final project. Analyze the budget and actual costs using the MDE Manufacturing Budget (Tables I, II, III, IV). Determine where variances occurred and why. Submit the Student Workbook with Tabs 3 and 4 completed with your budgets/variances calculations and a 1-2page Word document that discusses the implications of your findings on the company’s financial considerations. Explain which aspects of MDE’s budgeting process are in need of improvement and justify your response using your calculations. Address all critical elements in Section II. Use Tabs 5 and 6 of the Student Workbook for your budget and variance calculations. This milestone will be graded with the Milestone Two Rubric.  Milestone Three: Draft of Main Costing Systems (Section III) In Module Five, you will submit a draft of your main costing system recommendations. You have been asked to give management a recommendation on whether the bird feeder division should switch from process costing to activity-based costing. This is just an exploratory discussion, but management would like to know more about the differences between the two costing systems and if a different costing system might work better for the division. Submit a Word document that addresses the critical elements of Section III. This milestone will be graded with the Milestone Three Rubric.   Final Submission: Quantitative Analysis With a Memo to Management  In Module Seven, submit your quantitative analysis with a memo to management. It should incorporate all milestones and include ection IV of the critical elements listed in the Final Project Document. This submission will be graded with the Final Project Rubric (below).    Deliverables Milestone Deliverable Module Due Grading

Give us your instructions.
Select the type of service you need: writing, calculations, or programming. We’ve created an intuitive order form that tells you what information to enter and where, so make sure to fill out each required field. Also, make your requirements as specific as possible. Don’t rush! Take your time and explain everything in detail how it works.

Proceed to checkout and enter your credit card details or PayPal login, how to pay. Follow the payment provider’s instructions to confirm the transaction.
Now your order is in our system! We’ll start processing it right away.

Place Your Order

Contact Us

Frequently asked questions
Is your service confidential?

When you place an order with our company, we ask you to provide us with such personal information as your name, phone number, and email address. We need this data to keep you updated on the important things related to your order or account.

Is there a possibility of plagiarism in my completed order?

We complete each paper from scratch and in order to make you feel safe regarding its authenticity, we check it for plagiarism before its delivery. To do that, we use our in-house software, which can find not only copy-pasted fragments but even paraphrased pieces of text. Unlike popular plagiarism detection systems that are used by most universities (e.g. Turnitin.com), we do not report to any public databases—therefore, such checking is safe.

We provide a plagiarism-free guarantee that ensures your paper is always checked for its uniqueness.

Is there a money-back guarantee? If yes, how can I receive a refund?

You can certainly get your money back in several cases. You can receive a full refund if you have paid for your order twice or if you have placed two identical orders. In case your paper was late or the quality of the paper does not correspond to your expectations, you will get compensation for these issues.

Do you keep a database of pre-written essays?

No, we do not have such a database. All papers you order from us are written from scratch. This means your paper is unique and has never been published before—neither will it be published after we deliver it to you.

 

When will my custom paper be done?

While placing an order with WritersHub, you can choose a period of time within which a paper should be delivered to you. The countdown until the specified deadline starts automatically from the moment we receive your payment in our system. For example, if you pay for your order at 6pm on Monday and choose a 3-day delivery option, you will receive your custom paper by 6pm on Thursday.

Remember that a writer needs a sufficient amount of time in order to conduct thorough research. Therefore, please choose the most suitable deadline when you place an order. Moreover, the later you need your paper to be delivered to you, the cheaper it will be. Thus, you will be able to save your money while your writer will have enough time to work on your order and ensure its quality.

Make sure you upload all the additional materials at the very beginning. If you fail to do that, the deadline for your order will be postponed as well.

I haven’t received my custom paper by the deadline. What should I do?

Let us know immediately about that. You can do it by writing a message on Facebook or email us. Our support manager will carefully examine your order and will assist you with it right away. The reasons for late delivery may vary from time to time. It can happen that you have entered a wrong email address or your spam filter does not allow you to receive emails from us. It is also possible that the writer is waiting for your reply and can not continue working without your assistance, or we are checking the work for plagiarism. Whatever the case may be, contact us if you have any problems with getting your order on time.